magnetic construction blocks wooden magnetic blocks magnetic shape blocks kids magnetic blocks childrens magnetic blocks
Most Effective Ways To Overcome Wood Cnc Router's Problem
You are here: Home » CNC Laser » Cnc Basics » Cnc router solution » Most Effective Ways To Overcome Wood Cnc Router's Problem

Contact With Us

cont
 Tel
+86-13356681090 / +86-18763981090
 Add5-1,Shengjingjiayuan,No.6 Qingfeng Road,Lixia district,Jinan,Shangdong province,China
 E-mailinfo@dekcelcnc.com
 QQ:361018827
Skype:dekcelcnc

Most Effective Ways To Overcome Wood Cnc Router's Problem

Views:5     Author:Site Editor     Publish Time: 2017-11-14      Origin:Site

Most Effective Ways To Overcome Wood Cnc Router's Problem

Most Effective Ways To Overcome Wood Cnc Router's Problem


In the using of economical wood cnc router, there may be some problem of good quality cnc router for wood machine. This article Jinan Dekcel Cnc Equipment Company will introduce some common problem of China woodworking carving router and most effective ways to overcome wood cnc router's problem.

 

1. One axis or three axis does not move or move abnormally.

1). control card loosening or failure;

2). drive of corresponding shaft drive is failure;

3). motor of corresponding shaft is failure;

4). the corresponding screw breakage or screw nut failure;

5). slider of corresponding shaft is failure;

6). drive fine fraction, current setting are not same with software.

 

2. Z axis out of control.

1). control card loosening or failure;

2). electrostatic interference;

3). Z axis motor line is fault;

4). file path is error;

5). invertor interference;

6). the computer system has problems or viruses;

7). operation error

 

3. depth carving different.

1). control card loosening or failure;

2). motor fault;

3). driver fault or current is inconsistent with software settings;

4). Z axis motor line fault;

5). spindle motor failure;

6). invertor interference or data set error;

7). Electrostatic interference;

8). computer viruses or system problems.

 

4. The machine can not return to the mechanical origin.

1). the opposite direction;

2). control card failure or loose;

3). limit switch or data line failure;

4). driver failure;

5). motor failure.

 

5. The machine doesn't work when it starts up.

1). check whether the button is connected well or whether the button is burnt out;

2). check whether the AC contactor is short circuited or burned out.

 

As a wood cnc router leader in cnc machine industry, Jinan Dekcel Cnc Equipment company has focused on best woodworking carving cnc router machine many years. So if you are interested in our high speed cnc wood router, or have nay question about cnc router. Please contact Jinan Dekcel Cnc Equipment company as soon as possible. We are support service 24 hours online.

 

Thanks for your reading time.

 

 


Copyright  © 2016 Jinan Dekcel Cnc Equipment Co,.Ltd. All rights reserved

Home