Good price cnc router machine of Jinan Dekcel Cnc Equipment Company
You are here: Home » Cnc Basics » Cnc router solution » Cnc Basics » Cnc router solution » Good price cnc router machine of Jinan Dekcel Cnc Equipment Company

Contact With Us

cont
 Tel
+86-13356681090 / +86-18763981090
 Add5-1,Shengjingjiayuan,No.6 Qingfeng Road,Lixia district,Jinan,Shangdong province,China
 E-mailinfo@dekcelcnc.com
 QQ:361018827
Skype:dekcelcnc

Good price cnc router machine of Jinan Dekcel Cnc Equipment Company

Views: 7     Author: Site Editor     Publish Time: 2017-08-25      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Good price cnc router machine of Jinan Dekcel Cnc Equipment Company

Good price cnc router machine of Jinan Dekcel Cnc Equipment Company 


In our Jinan Dekcel Cnc Equipment Company, there are many different kinds of cnc machines. For example, woodworking engraving cnc router machine, cnc stone carving router machine, cnc plasma cutter machine, cnc laser engraving cutting machine and so on. Toady, we will introduce the notice of cnc router engraving machine when we are using.


1. the maintenance

One, if the cnc router engraving machine continuous running time below 10 hours per day. The cnc woodworking engraving router machine should to be ensure the cooling water cleaning and water pump normal work. It is must not cause the water of the spindle motor shortage. The customers of the cnc router should regularly replace the cooling water in order to prevent the water temperature is too high.

 

In winter, if the working environment is too low, the water in the tank can be changed into antifreeze.


Two, when the machine is used every time, the stone carving cnc router machine users should pay attention to cleaning and be sure to clean up the platform and drive system. Cleaning up the  for the transmission system (X, Y, Z three axis) lubrication, refueling. (Note: X, Y, Z three shaft polished rod is maintained with engine oil. Screw rod is added with high speed grease.)

 

In winter, if the working temperature is too low, screw rod should be used gasoline to wash clean, then add oil, otherwise it will cause the resistance of cnc router engraving machine transmission part is too large and cause the cnc engraving router machine to dislocation.

 

Three, when you check the electrical equipment, you must cut off the power supply, until the monitor does not show and the main loop power indicator lights out, you can proceed.

 

2. the maintenance of spindle of stone engraving cnc machine

One, let the cnc stone carving router machine running consecutively. The solution is let the stone engraving cnc router machine stop about 30 minutes each working 10 hours which can prolong the service life of the cnc machine.


Two, the power supply of stone cnc carving machine is too high. The solution: can install voltage stabilizer.


Three, water circulation system of the water tank for cnc marble stone carving machine is not smooth that need to clean up.

 

Four, test the temperature of the working environment, if the temperature is high. That maybe  also cause spindle temperature is too high. The solution is you can install the more fans for the cnc stone carving router machine.

 

If the spindle maintenance of the stone carving cnc router machine is not good, the spindle motor will heating. Heat dissipation is not good, it will seriously block the water cycle, burn coil bearings, so that the cnc tombstone engraving cnc machine can not work properly. The formation of scale not only reduces heat transfer greatly, but also raises energy consumption and even harms the equipment.

 

So when we use the cnc router for stone carving machine, we should pay a attention for the maintenance of the spindle. Then the stone craving router machine for marble will work better for us.

 

You know what should we notice when we use the cnc router engraving machine. Then do you know how to choose a most suitable cnc woodworking engraving router machine, stone carving router machine or other cnc machines.

 

You know there are many kinds of cnc machines in the market, but it is important for users to choosing a suitable cnc carving router machine for the work.

 

Firstly, i think you should choose a specialized cnc router engraving machine manufacturer. And the Jinan Dekcel Cnc Equipment Company is a good choice for you.

 

Our Jinan Dekcel Cnc Equipment Company is focus on cnc router, cnc laser, cnc plasma cutting machine, oscillating knife cutter machine many years. There are many kinds of cnc machines you can choose. For example, if you are interested in our wood engraving cnc router machine for your work, but you don’t know what kind of cnc wood engraving machine is suitable for your work. Don’t worry. Please answer me some questions.

What do you mainly do with the woodworking cnc carving router machine?

What materials does the woodworking cnc router engraving machine process? Wood? MDF? Or other materials?

What is the maximum size and thickness of the materials you process?

If you are convenient, highly appreciate if you could send some pictures of your products?

Sorry to ask so much question that in order to provide a most suitable cnc router machine for you.


In addition, the team of our company will give you a best services. According to your requirement of the cnc router, we can also recommend a most suitable cnc engraving router machine for your work.


So if you are interested in our cnc router machine, cnc woodworking engraving router, stone carving cnc machine, plasma cutter cnc machine, cnc laser, oscillating knife cutting machine and so on. Anyway, if you have any question about the cnc router machines, welcome to contact our Jinan Dekcel Cnc Equipment Company. We are support service 24 hours online.

 

Thanks for your reading and trusting.


Copyright  © 2016 Jinan Dekcel Cnc Equipment Co,.Ltd. All rights reserved
Home