Cnc wood engraving machine water cooling spindle anti-blocking method

First, make sure the water is clean,put a layer of filter in the water pump outlet,the best way is to replace the circulating water in the pump every day timely.This also can effectively reduce the impurity flow into the spindle,causing the spindle plug.

Once the spindle is blocked,can use the air compressor's air pipe connected to the cnc wood engraving machine spindle into the water pipe,repeated blowing several times to solve the congestion problem,if you blow into the water pipe does not solve the problem, you can turn blowing the outlet pipe to ensure that can clear the water pipe.Circulating water pipes are inserted in the water is not easy to detect whether the blockage.When the cnc wood engraving machine processing time should usually touch the spindle temperature,if temperature higher is necessary to check the water pipe,so as to avoid the temperature too high, damage the spindle.