A Oscillating knife cutting machine comprising a motor mounted in a housing for driving a lengthwise oscillating knife extending in a substantially vertical direction, further comprising a material presser foot mounted on a carrier bar extending in the longitudinal direction of the oscillating knife and displaceably guided in this direction at the housing, and also comprising an actuating member mounted on the housing for releasing a support means for the carrier bar, characterized in that the actuating member is also coupled with a lifting device for lifting the carrier bar in a stepwise manner.

Once the spindle is blocked,can use the air compressor's air pipe connected to the cnc wood engraving machine spindle into the water pipe,repeated blowing several times to solve the congestion problem.

Wood cnc router limit switch is the starting point of woodworking engraving machine trip, limit switch is to prevent the wood cnc router beyond the scope of the engraving.

If doing well maintenance of the laser tube, the service life can reach more than 12 months.Common troubleshooting of laser tube,1,laser engraving not deep.2,High pressure ignition and discharge.3,Laser tube broken, cracked, water head off:

CNC plasma arc cutting is use high-temperature plasma cutting arc machine to make the workpiece at the metal incision department of melting (and evaporation), and by high-speed plasma momentum to exclude the formation of molten metal cutting a processing method.

The matters should pay attention to when using cnc laser machine laser tube.Before cnc laser machine working, first connected to the cooling water, according the principle of low into the high, adjust the water pipe position to ensure that the cooling water is full of cooling tube, the laser tube can not exist bubbles, and then turn on the power.

Plate furniture production line as a high-tech content of CNC router machine in the current production of plate furniture play an increasing role, it can be fast and efficient cutting,drilling and do other processing technology on a variety of sheet. So, as this high-performance woodworking machine how we do maintenance work?

Laser engraving machine maintenance,Particular note, do not adjust the light intensity more than 20MA, to prevent rapid aging of the laser tube.Be careful to clean the laser engraving machine reflector mirror, otherwise the light path must be re-adjusted.

Before using the CNC router , you should carefully read the machine user manual and other relevant information in order to correctly operate the cnc router, and note the following:

When using laser marking machine should pay attention to the following points:1,Do not modify the protective circuit of the machine and disassemble the main components of the laser marking machine.