magnetic construction blocks wooden magnetic blocks magnetic shape blocks kids magnetic blocks childrens magnetic blocks
The solutions to reset the the X, Y , Z axis of wood cnc engraver router
You are here: Home » Application » Wood » The solutions to reset the the X, Y , Z axis of wood cnc engraver router
Share to:

The solutions to reset the the X, Y , Z axis of wood cnc engraver router

Jinan dekcel cnc company offers wood cnc engraver router of various kinds. It is a common situation that the X, Y, Z axis of wood cnc engraving router cannot reset after a period of working, which annoy many users badly. The following passage will give the solutions to solve it.

Quantity:
  • DEK-1325
  • DEKCELCNC

The solutions to reset the the X, Y , Z axis of wood cnc engraver router 


Jinan dekcel cnc company offers wood cnc engraver router of various kinds. It is a common situation that the X, Y, Z axis of wood cnc engraving router cannot reset after a period of working, which annoy many users badly. Here, the following passage will offer you the solutions to deal with it.


First part: Brief analysis of cnc wood engraving router without resetting:


1.The power indicator light is not on:

The solutions:


Users who have cnc router wood engraving are supposed to check the access of 220V (AC) is open or whether the power fuse is burning or not or if the power switch is open or not.


2.The lamp of axis cnc wood router is bright, but the X, Y, Z axis cannot reset. 

The reasons

(1) the computer is bad or the emergency stop switch is open; 

(2) the software is not installed well and the card is in bad contact; 

(3) the on-line line and the relay are in bad contact; 

(4) the inspection signal line and the three on-line lines are blocked.


Second part: Check if the X, Y, Z axis of cnc wood engraving router have reset or not


1)Open the computer and click into the control interface, then repeatedly open and close the  power supply controller. Pay attention to the time interval, which should be of 3 to 5 seconds: if the computer can display, the three axis of wood cnc engraver router has been reset.

2)check the light detecting signal line, card board, online line, driver and see if they can work well or not.


If the wood cnc engraver router can be reset by the above approach, but the X, Y, Z still don’t move control by the keyboard. 


The solutions:

(1)check the public power or power fuse board driver

(2) If any axis does not move or move in the opposite direction, then the control signal of drive motor is bad.


Jinan dekcel cnc company launches Double processing wood router engraving machine and Cnc wood router carving machine for sale.


Hope this article will help you. If you have any questions about our cnc wood enraving router, please contact us as soon as possible. Jinan Dekcel Cnc Euipment Co., Ltd will always be there for you.


xyz axis of wood cnc engraver router.jpg


Copyright  © 2016 Jinan Dekcel Cnc Equipment Co,.Ltd. All rights reserved

Home