Publish Time: 2017-07-19 Origin: Site
Wood engraving router machine is a kind of fast engraving equipment.In recent years,cnc woodworking router machine has totally replaced the traditional hand carving method,today in this article we will introduce some common faults and solutions for cnc router wood machine's motor:
A: If the table cnc router wood machine's motor speed is getting relatively slow,this is mostly related to the motor power,we can check the cable whether it is short circuit,or it may be caused by the lack of motor lines.
B:Cnc wood cutting and engraving machine motor occurs reversal phenomenon.
This situation is generally due to the lack of cnc router machine's motor lines.When this happens,please directly replace UVW output of industrial cnc wood router.
C: serious fever for the wood carving cnc routermotor
If the motor is becoming hot,you need to check whether carving wood cnc router machine's circulating water and water pump is working properly.Change the water better lower than 25℃,so that wood carving cnc router table can continue work for a long time.
D: If cnc wood router for sale is making some noise,usually it is the motor internal failure, at this moment please ask the after-sale man for help.If it is due to the heavy motor load,you can adjust the motor speed of industrial wood cutting cnc router machine.
In conclusion,these are four problems for cnc wood router table machine motor you may encounter and their specific solutions,hope this article will help you in operating cnc woodworking router machine.By the way,if you still have any other doubts about cnc wood cutting and engraving machine,please contact us immediately.