| No |
DEK-0609M |
Parameter |
| 1 | X,Y,Z working size | 600*900*200mm |
| 2 | Table size | 720mm x1140mm |
| 3 | Positioning accuracy | ±0.01mm/300mm |
| 4 | Repositioning accuracy | ±0.01mm |
| 5 | Table surface | T-slot Extrusions |
| 6 | Frame | Cast iron |
| 7 | X, Z Structure | TBI ball screw imported from Taiwan |
| 8 | Y Structure | HIWIN Rail Linear Bearings and Ball Screw imported from Taiwan |
| 9 | Max. power Consumption | 0.8KW |
| 10 | Max. Rapid Travel Rate | 10000mm/min |
| 11 | Max. Working Speed | 6000mm/min |
| 12 | Spindle Power Motor | 1.5KW/2.2KW air cooling spindle |
| 13 | Spindle Speed | 0-24000RPM |
| 14 | Drive Motors | Stepper system |
| 15 | Working Voltage | AC220V/50/60Hz |
| 16 | Command | G code |
| 17 | Operating System | NC Studio (DSP controller for options) |
| 18 | Interface | USB |
| 19 | Flash Memory | 128M(U Disk) |
| 20 | Collet | ER16 |
| 21 | X,Y Resolution | <0.01mm |
| 22 | Software Compatibility | Type3, Artcam, Ucancam V8 for options |
| 23 | Running Environment | Temperature: 0°C~45°C |
| | Relative humidity: 30%~75% | |
| 24 | Packing Size | 1600*1300*1700 |
| 25 | Guarantee | One year |