How to prolong the service life of the wearing parts of Hypertherm plasma cutting machine?

How to prolong the service life of the wearing parts of Hypertherm plasma cutting machine?

Method for prolonging service life of wearing parts of hypertherm cnc plasma cutting machine:

1.The use of 105A hypertherm cutting machine, the gas of 1325 plasma cutting should be kept dry and clean. The wearing parts of plasma cutting cnc price need to clean and dry to work properly. The plasma gas with the oil or water of plasma cutter machine sale will shorten the service life of wearing parts, thereby it more easily damaged plasma cutting machine parts.

2. To ensure the use of gas pressure of cnc plasma cutting machine. The correct air pressure of Hypertherm plasma cutter is very important to the service life of 1530 plasma cutting machine parts. When the gas pressure is too high, the service life of the plasma electrode will be greatly shortened. If the gas pressure too low, the service life of the plasma cutting nozzle will be affected.

3. According to the plasma cnc cutter manual, using reasonable cutting height, as far as possible the use of slightly higher than the table height parameters of perforation. Better use of American Hypertherm plasma cutter cnc machine vulnerable parts.

4. The punch thickness should be within range of the plasma cutting machine. The cnc plasma cutting machine can not work in more than the thickness of the steel plate perforation. The perforation thickness is usually normal to the cutting thickness of 1 / 2, for example: American Hypertherm powermax1650 plasma cutting machine for cutting 1 inches (about 25mm) of the carbon steel, the thickness of perforation theplasma cutter should be 0.5 inches (about 12.5mm).

5. cutting the workpiece should start from the edge, as far as possible from the edge of the steel plate. As little as possible perforation cutting by the plasma cutter. Cutting from the edge of the plate as the starting point will prolong the life of the damaged parts of the 1325 Hypertherm plasma cutter cnc. The correct method is to direct the plasma cutting nozzle directly to the edge of the workpiece before starting the plasma arc.

So dear, if you are interested in our cnc plasma cutting machine for your work, or have any question about the plasma cutter machine. Please contact Jinan Dekcel Cnc Equipment company. We are support service 24 hours online.

Thanks for your reading.