The common faults of cnc router for wood furniture carving industry
Jinan dekcel cnc company produces cnc router for wood carving router from small size to normal size with the attractive price. Among those components, the spindle is considered as the one of the most important parts for cnc carving router for wood. So when there is something wrong with cnc wood carving spindle, users are supposed to pay attention to find out what the problem is and fix it as soon as possible. The following passage will introduce some common faults and offer the solutions.
1. The sound of the spindle of wood carving China cnc router is abnormal
(1) The inverter of wood cnc engraving router is set incorrectly;
(2) To check whether the cooling water is circular or not.
(3) The spindle bearing of wood carving cnc rotuer in China has been damaged.
(4) If it is noisy when setting the tool and normal without tool, please replace the tool.
2. The spindle of high speed cnc wood carving router is hot or very noisy:
(1) Checking whether the cooling water circular or not..
(2) Checking whether there is some thing wrong with the spindle bearing.
(3) If it is noisy when setting the tool and normal without tool, please replace the tool.
3. The spindle cooling water does not circular:
(1) Check that the cooling pump is working properly or not.
(2) Check the pipe is smooth or not: Take the pipe off from the cnc carving wood router spindle, then using the steam gun to blow it.
Jinan dekcel cnc company launches Cylinder cnc router engraving machine for round material and Furniture Cnc router woodworking engraving machine to meet the large demands of markets.
Hope this article will help you. If you have any questions about cnc router bits for cutting wood, please contact us as soon as possible. Jinan Dekcel Cnc Euipment Co., Ltd will always be there for you.