What is laser marking?
"Laser marking" stands for marking or labeling of workpieces and materials with a laser beam. In this regard, different processes are distinguished, such as engraving, removing, staining, annealing and foaming. Depending on the material and the quality requirement, each of these procedures has its own advantages and disadvantages.
Benefits of led bulb fiber laser marking machine
High-precision marking at constant quality
Thanks to the high precision of laser marking, even very delicate graphics, 1-point fonts and very small geometries will turn out clearly legible. At the same time, marking with the laser ensures constant high-quality results.
Durable marking
Laser etching is permanent and at the same time resistant to abrasion, heat and acids. Depending on the laser parameter settings, certain materials can also be marked without damaging the surface.
High marking speed
Laser marking is one of the fastest marking processes available in the market. This results in high productivity and cost benefits during manufacture. Depending on the material structure and size, different laser sources or laser machines can be used to further increase the speed.
DEKCEK machines for laser marking
DEKCEL offers you a wide range of flatbed and galvo laser machines for marking a large variety of materials.
Fiber laser marking bulb technical parameter
Laser Generator | made in China(optional Germany IPG or Britain SPI) |
Laser Power | 10W/20W/30W |
Laser Length | 1060nm |
Quality of Lase Beam | m2<1.5 |
Laser Repetition Frequency | ≤100 KHz |
Standard Marking Area | 100×100mm |
Optical Marking Area | 100*100mm/200*200mm/300*300mm |
Engraving Depth | ≤1.2mm |
Engraving Speed | ≤12000mm/s |
Minimum Line Width | 0.01mm |
Minimum Character | 0.05mm |
Resolution Ratio | ±0.001mm |
Gross Power | ≤500W |
Working Voltage | 200V/50Hz/10A |
Cooling Mode | Air cooling |
The detail parts of led bulb fiber laser marking machine