Why the cnc wood engraving router can not absorb the wood material?

Why the cnc wood engraving router can not absorb the wood material?When using CNC woodworking engraving router, customers may encounter the phenomenon that the vacuum table has no suction and cannot absorb the wood. In the use of cnc woodworking engraving router machine, customers may meet the phenomenon that the vacuum table don't have the suction and cannot adsorb the wood plate. 

Here, Jinan dekcel cnc computer are going to provide several solutions of this non-suction phenomenon of wood engraving cnc router. 

1, whether the motor line  and voltage of wood cnc engraver router machine is normal or not;

2, if the water in circulation pump is less than the standard level, the motor of cnc wood engraving router will be stuck and rust.

3, vacuum pump of cnc router for wood engraving filter blocks and clean it up;

4, the cnc wood carving router machine table or pipe have the leak phenomenon;

The vacuum table of cnc woodworking engraving router can fix tightly the wood material to avoid the happening of engraving dislocation. Compared with the fixing way of using splint, the vacuum table is designed to save the wood material, energy and time at the same time.

When using CNC woodworking engraving router, customers may encounter the phenomenon that the vacuum table has no suction and cannot absorb the wood. Here, ji 'nan desai 'er CNC computer will provide several solutions for the non-suction phenomenon of this woodcut CNC router.

1, more than ordinary woodworking engraving machine or process although woodworking engraving machine can open, but the lathe bed structure, and mechanical components is determined by its not cutting work for a long time, otherwise it will cause deformation and mechanical precision lathe bed will be more low, cutting machine used by the structure of lathe bed and accessories are better than wood carving is much higher, can adapt to the long time cutting work, and very fast.

2, CNC open material machine and woodworking engraving machine use of the control system is different, CNC open material machine can cooperate with a lot of design layout optimization software, can improve the utilization of the plate, and the software can automatically open single, automatically open material, simple operation can be produced, which is the ordinary woodworking engraving machine can not be compared.

3, the material machine and carving machine in the plate fixed aspects are also different: the material machine is basically based on the vacuum adsorption table, which needs to increase the adsorption pump this part, is one of the reasons for the increase in cost. A lot of customers will say when buying a machine, the processing of the whole board with adsorption table is very good, but the processing of a small plate open adsorption pump will be very expensive, so want to absorb the dual use of the table, but this perception is biased, its adsorption effect is not as good as the total adsorption table. Now the adsorption table is partitioned, the small plate can open a single adsorption area to achieve the purpose of saving electricity. As for the adsorption pump, it is divided into air cooling and water cooling. The air cooling adsorption pump is noisy, but the water cooling adsorption pump needs to pay attention to the problem of anti-freezing in winter, so you can choose

The vacuum table of cnc woodworking engraving router can fix tightly the wood material to avoid the happening of engraving dislocation. Compared with the fixing way of using splint, the vacuum table is designed to save the wood material, energy and time at the same time.

Hope this article will help you. If you have any questions about wood carving cnc router price and qualities, please contact us as soon as possible. Jinan Dekcel Cnc Euipment Co., Ltd will always be there for you.